Imagine X1T – Tower


Warranty: 5 Years

*Excludes Northern Canada, Hawaii, and Alaska, and does not apply to shipments affected by extreme weather and courier service suspensions

Modest size, monumental performance

A deceptively thin and discreet floor standing speaker, the Imagine X1T has wide bandwidth and high SPL output capabilities that defy its small size. A seamless blend of design and hifi performance, the X1T is able to meet the demands of your multi-channel, or stereo setup. Capable, energetic and attractively priced, these speakers pack a mighty punch.

  • 200 watts input power
  • 1” (25mm) titanium dome with ferrofluid neodymium magnet
  • 2 x 5¼” (133mm) clay/ceramic reinforced injection molded polypropylene cone woofers


Size-defying power
The Imagine X1T Tower Speaker is a dual-woofer transitional two-and-a-half way speaker with identical 5¼” (133mm) woofers that work together at the lowest frequencies but crossover at different frequencies to integrate better with room acoustics and give the best dispersion and power response. Imagine X models are all carefully matched in timbre, giving you the freedom to combine any of the models to work together in a variety of different rooms and system setups.

Dynamic accuracy
Like all woofers in the Imagine range, the cone materials have been carefully engineered for optimal control, allowing for a simpler, more cost effective crossover design. Tonal, spatial and dynamic accuracy are at the forefront of this speakers design which includes the Imagine one-inch titanium dome tweeter. The X1T fills the room with a refined mix of high and low frequencies that blend beautifully together.

Bring your space to life
Placement throughout the home is effortless thanks to the smart, minimalist design of these speakers and their small footprint. As the smallest floorstanders in the Imagine X Speaker line up, the X1T’s can be easily incorporated into your space. Their modest size combined with a handsome cabinet design will suit any room and compliment many different system setups without any added clutter.

  • 200 watts input power
  • 1” (25mm) titanium dome with ferrofluid neodymium magnet
  • 2 x 5¼” (133mm) clay/ceramic reinforced injection molded polypropylene cone woofers
  • Bass reflex (ported) design
  • Two sets of gold-plated five way binding posts can be bi-wired or bi-amped
  • Black ash vinyl finish

Frequency Response

On Axis @ 0° ±3dB35-23,000Hz
On Axis @ 0° ±1 1/2dB48-20,000Hz
Off Axis @ 30° ±1 1/2dB48-10,000Hz
LF Cutoff -10dB30Hz


Anechoic Chamber88dB
Listening Room90dB


Nominal8 Ohms
Minimum4 Ohms

Input Power

Recommended20 - 200 Watts
Program200 Watts

Acoustic Design

Tweeter (Nominal)1” (25mm) Titanium Dome with Ferrofluid

Neodymium Magnet
Woofer (Nominal)2 x 5 1/4” (133mm) Injection Moulded Clay/Ceramic reinforced

Polypropylene Cone

Rubber Surround / Dual Magnet
Crossover1,800Hz, LR4, 800Hz
Internal Volume1.42 cu ft (40.2L)
Design TypeBass Reflex Front Port

Dimensions / Weights / Finish

Size (W x H x D)8 1/4 x 34 1/2 x 15 5/8” *

208 x 874 x 395mm
WeightNet - 38lb (17.3kg)/each

Shipping - 45.3lb (20.6kg)/each
FinishBlack Ash
Notes* Non-metric measurements are approximate.

All specifications are subject to change without notice.

Data Sheets



You may also like…